Eco-friendly mineral adhesive with an extremely low chemical additive content for high performance bonding with no vertical slip and long open time, for porcelain tiles, ceramic tiles and natural stone.
- Additional Information
- Reviews (0)
- Substrate Preparation
- Data Sheet
- Product Enquiry
Ideal for wall tiling
- Contains mineral bentonite:
Bioflex® contains exclusive mineral bentonite which, on contact with the mixing water, transforms into a highly thixotropic adhesive, maintaining shape and thickness under the tile and guaranteeing unbeatably smooth spreading.
- Contains natural NHL lime:
Bioflex® contains mineral cement improved with natural NHL lime, which gives the mix greater plasticity and slide. It prevents thickening in the bucket and reduces the use of chemical additives.
- Contains plant latex:
Bioflex® contains ingredients of plant origin that improve workability and open time. Bioflex® has an extremely low chemical additive content and does not emit dangerous substances and unpleasant odours
All substrates must be level, cured, undamaged, compact, rigid, resistant, dry and free from any debonding agents and from damp rising. It is good practice to dampen highly absorbent concrete substrates or apply a coat of Primer A Eco.
To guarantee maximum adhesion it is necessary to apply a layer of adhesive sufficient to cover the entire back of the coating material. Large, rectangular sizes with sides > 60 cm and low thickness sheets may require adhesive to be applied directly to the back of the material. Check samples to make sure the adhesive has been transferred to the back of the material.
Create elastic expansion joints:
– ≈ 10 m2 in external applications,
– ≈ 25 m2 in internal applications,
– every 8 metres in long, narrow applications.
Respect all structural, fractionizing and perimeter joints present in the substrates.